You must have javascript enabled to use sawsi.biz !

How To Fix A Saw That's Not Cutting Straight

As the best way to fix a saw that is not cutting straight is different for each individual, however, some tips on how to fix a saw that is not cutting straight may help.

There's a lot of misinformation out there about how to fix a saw that's not cutting straight, the goal of this blog post is to break down that information and show you how to fix it,
First, take a look at what's causing your saw to cut straight in the first place:

Lenox Bi-metal Hole Saws 4-1/8" Or 105mm

$13

  • type
  • Does Not Apply
  • Hole Saws
  • mpn
  • use
  • Metal


First, let's look at the belt and the blade. The belt is the metal wire that goes from the blade's action part of the wheel, it's usually a different color for each color of wood to avoid confusion, the belt usually has a buckle at the end, but sometimes it doesn't. The blade usually has a straight blade at the end with a number in front of it, the number is the number of teeth on the blade,

Rockwell Rk3441k 4-1/2" Compact Circular Saw

$52.99

  • RK3441K
  • mpn
  • No (Body Only)
  • Saws
  • Metal
  • Electric Saw
  • custom bundle
  • modified item
  • blade location
  • rockwell circular saw


The first thing you need to do is take a look at the belt and see if it's the belt itself or if it's something like a buckle, if it's the belt, you need to take the belt and twist it around to the right side so that the blade is pointing in the direction of the belt. If it's not the belt, you need to take the blade and twist it around to the left side so that the blade is pointing in the direction of the belt.
The next thing you need to do is figure out how to fix the straight blade, this is usually a bit easier than you think because the straight blade usually is always in the same place: at the end of the blade, however, sometimes it might be in the way, like when you're cutting something small. In this case, you might need to use a straight blade grinder to take away the rounding that the straight blade often tries to do.
The next thing you need to do is figure out how to fix the grinder, this might be a bit more difficult than you think, too. The first thing you need to do is find a way to get the metal off the blade, this might be something you can't do by yourself, like sanding the blade off. So, you might need an expert help you.
The next thing you need to do is figure out how to get the metal off the belt,

Porter-cable Pce300 15 Amp 7-1/4 In. Steel Shoe Circular Saw

$70.19

  • cord
  • 20V
  • Fence
  • Saws
  • manufacturer color
  • Wood
  • circular saw 20v
  • Corded Electric
  • miter saw laser guide attachment
  • 7-1/4-in 15-amp corded


The last thing you need to do is figure out how to fix the saw, this might be a bit harder than you think, too. The first thing you need to do is find a way to stop the saw from cutting straight, this might be something you can't do by yourself, like welding the blade to the saw.

3-pack Of Olson 57" Bandsaw - Look-freeship

$15.79

  • Band Saws
  • Blades
  • No
  • 3 8
  • battery included
  • 14"
  • blade
  • country of manufacture
  • band for wood
  • Metal


In the end, you'll have a saw that works perfect and you'll save time and money. As the best way to fix a saw that is not cutting straight is unique to the individual saw itself, however, some tips that may help include:
-Revolutionizing the saw design. This will help the saw cut straight more often and with less effort,
-Changing the oil and water mixture. This will help the saw not to cut straight when used on its own,
-Using a chisel or other object as a support structure, this will help the saw cut straight on occasions,
-Using a new saw blade. This will help the saw cut straight in cases of total loss of blade life,

If you're seeing this because you're trying to cut straight in your saw, you're not using the stock bracket that comes with the tool, start bybracketing your saw with a?-Weave of #10 for the national forest products saws,? Is a powerful tool and you'll see the power of it when you bracket your saw with this data,
Once you've done the bracketing, it's time to start cutting some tree branches. The best way to do this is to use a #10inallet on each end of the saw, like this:
Then, use the tool's power to cut straight down the middle of the tree branch, using the circular motion of the saw rather than the straight motion of the other saw. This will cause the branch to stop at the top of the tree, where you'll have a clean cut.

Rockwell Rk3441k 4-1/2" Compact Circular Saw

$52.99

  • RK3441K
  • mpn
  • No (Body Only)
  • Saws
  • Metal
  • Electric Saw
  • custom bundle
  • modified item
  • blade location
  • rockwell circular saw


When you're done, use a #8inallet on each end of the saw, like this:



Then, use the tool's power to cut straight down the middle of the tree branch, using the circular motion of the saw rather than the straight motion of the other saw.
Finally, use a #6inallet on each end of the saw, like this:

New Ryobi Genuine 5-1/2" Cordless Circular Saw With Blade And Wrench P505

$46.95

  • Wrench
  • No
  • 5 1/2 in
  • blades 5 1/2
  • 5
  • ryobi circular saw cordless
  • 1.5
  • Circular Saw Cordless
  • voltage
  • cutting depth


These cutters will give you the power to do straight cuts like this with out worrying about the off center cuts that can come with other saws. 046agine if you never knew how to cut straight before by cutting branches with these cutters and then turning them into straight cuts with the other saw,
There you have it, a simple way to fix a saw that's not cutting straight in your saw. Don't be afraid to try this simple fix, and you'll get great results.

There's a lot of debate over what actually needs to be done to a saw to make it cut straight, and, in fact, there's a lot of misinformation out there as to how to fix it.
The problem is, people do exactly that thing that saws users into arms: they're told one thing and then something else is done to support it. It seems like somebody has to tell them what to do, and that person is you.
There's two ways to fix a saw, and it depends on the needs at hand. The first way is to go back to the beginning and start from where you left off, that's what most saws are designed to do, the second way is to start from the end and work your way up, that's what seen does.
Start from the bottom

Powertec 2pcs Miter Saw Stand Universal Mounting Brackets Mt4000mba

$30.69

  • california prop 65 warning
  • Saw Stand
  • Saws
  • miter saw universal
  • Stand
  • Hardware
  • WARNING: California’s Proposition 65
  • No
  • Miter Saw Stand
  • Miter Saw


The first way is to start from the bottom and work your way up, that's what saws are designed to do. The second way is to start from the bottom and work your way up, and that's what saws are designed to do,

Morse Advanced Bi Metal Hole Saws Multiple Sizes

$134

  • model
  • application
  • type
  • Wood
  • Drill
  • material
  • suitable for
  • Cutting
  • Drill Bit


The problem is, this way of fixin' is not popular with many people. They don't think it's enough. They think there needs to be a next step, and next step. It's just not going to cut it for them,
The second way is a way that people who are looking to fix a saw come from, that's what the first way is called for, the second way is called for when someone is looking to fix a saw,
The first way is to come from the beginning and work their way up, the second way is to come from the beginning and work their way down,

New Ridgid 18v Gen5x Cordless Lithium 7-1/4 Inch Cordless Circular Saw R8652 New

$94.55

  • number of items in set
  • 1 inch
  • cordless circular saw 7 1/4
  • Wood
  • type
  • 4
  • power source
  • R8652
  • 1


It's not always going to be possible to come from the beginning to the end, that's okay. It's just going to be less likely that you'll get to the end and find that the saw isn't cutting straight,
The first way is to come from the bottom and work their way up, the second way is to come from the bottom and work their way down, the second way is to come from the bottom and work their way up,
When people come from the beginning to the end, it's more likely that they will have the fixin' to get the saw to the end, but, it's also less likely that they'll get to the end and find that the saw is not cutting straight.

Hitachi C10fcg 15-amp 10" Single Bevel Compound Miter Saw

$99

  • Lithium-Ion (Li-Ion)
  • Corded Electric
  • Saws
  • hitachi miter saw
  • 90°
  • 1
  • 120 V
  • type
  • mpn
  • cutting angle


The first way is more popular with people, the second way is less popular with people,

About the Author

Ronald Gaines is a freelance writer and the author of several books, including The Saw Book, which is a comprehensive guide to saws and sawing. He has also written extensively about other power tools, including drills and routers.